Evaluation of modified clear Twin Block aligner in treating adolescents with skeletal class II malocclusion: A two-centre cephalometric study.

INTRODUCTION: The purpose of this study was to evaluate the therapeutic effect of modified clear Twin Block (CTB) aligner and traditional twin block (TB) appliance from skeletal, dentoalveolar and soft tissue changes in adolescents with skeletal class II malocclusion. METHODS: A total of 80 adolescents, included in this study from two medical centres, were distributed into CTB group, TB group and control group based on the treatment they received. Lateral cephalograms at pre-treatment (T1) and post-treatment (T2) were measured by modified Pancherz's cephalometric analysis, and dentoskeletal and soft tissue changes were analysed by independent-sample t-test, paired-sample t-test, ANOVA test and Scheffe's Post Hoc test. RESULTS: Seventy-five adolescents completed the study, including 32 in the CTB group, 32 in the TB group and 11 in the control group. Both CTB and TB treatment showed significant differences in most dentoskeletal and soft tissue measurements. Compared with the control group, improvements were observed in class II molar relationship through significant different in S Vert/Ms-S Vert/Mi in the CTB group (P < .01) and the TB group (P < .001), as well as deep overjet through significant different in S Vert/Is-S Vert/Ii in the CTB group (P < .001) and the TB group (P < .001). Besides, the CTB group also showed less protrusion of lower incisors and resulted in a more significant improvement in profile with fewer adverse effects on speaking, eating and social activities. CONCLUSIONS: For adolescents with skeletal class II malocclusion, CTB appliance was as effective as TB on improving dentoskeletal and soft tissue measurements, featuring more reliable teeth control and patient acceptance.

Invisalign Lite: a cross-sectional investigation of orthodontist treatment-planning practices.

OBJECTIVES: To survey treatment-planning practices of orthodontists related to the Invisalign Lite clear aligner appliance (Align Technology, San Jose, Calif). MATERIALS AND METHODS: Patients satisfying inclusion and exclusion criteria and treated with Invisalign Lite were selected from a database containing more than 17,000 patients. Relevant data regarding treatment-planning practices were obtained from Align Technology's treatment-planning facility, ClinCheck, and evaluated. RESULTS: Most (n = 135; 79.9%) patients were female and had a median (interquartile range [IQR]) age of 30.5 (23.8, 43.1) years. The median (IQR) number of aligners for the sample was 23.0 (14, 28) for the maxilla and 24 (14, 28) for the mandible. Most (n = 122; 72.2%) patients required at least one additional series of aligners. More locations for interproximal reduction (IPR) were prescribed in the mandible (mean 1.91 [1.78]) than in the maxilla (1.03 [1.78]; P < .024) in the initial accepted plan of all patients. More teeth were prescribed composite resin (CR) attachments in the maxilla (P < .0001) in the initial accepted plan of all patients. Issues regarding tooth position protocols (n = 50; 53.3%) and requirement for additional IPR (n = 68; 45.3%) were reasons for treatment plan changes before acceptance of the initial treatment plan by orthodontists. CONCLUSIONS: More than 7 of 10 patients required at least one additional series of aligners after the initial series of Invisalign Lite aligners was completed. Prescription of IPR was more common in the mandible, and prescription of CR attachments was more common in the maxilla.

Evaluation of the Consistency of Two Interproximal Reduction Methods in Clear Aligner Therapy: A Preliminary Study.

Objective: To compare the consistency of two interproximal reduction (IPR) methods in terms of the amount of planned and performed IPR during clear aligner therapy (CAT). Methods: Thirty-four patients who received IPR using hand-operated abrasive strips (Group 1, 20 patients, 162 teeth) and motor-driven 3/4 oscillating segmental disks (Group 2, 14 patients, 134 teeth) during CAT were included in this preliminary study. The consistency between the planned and performed IPR amounts was evaluated within and between groups for teeth and quadrants. Results: In Group 1, the amount of IPR performed on teeth numbers 22 and 43 and in the upper left quadrant was found to be statistically less than that of planned. On the other hand, the amount of performed IPR was statistically higher on tooth number 44 and in the upper right quadrant, whereas it was statistically less on tooth number 33 when compared with the planned amount in Group 2. The inconsistency between the planned and performed IPR amounts were statistically significant only in Group 1 and for teeth numbers 11, 21, 32, 33, and 43. No significant difference was found when the same parameter was compared between the groups. Conclusion: The consistency of IPR was found to be better with the motor-driven oscillating disk system than with the hand-operated IPR strip system.

An In Vitro Study of the Abrasive Potential of Various Toothbrushes on the Surface of Aligner Attachments.

Background Attachments play a vital role in aligner-led orthodontic therapy, first passively through retention of the appliance and secondly, through bringing about tooth movement, by virtue of its active surfaces, to achieve treatment goals. Additionally, irregularities on the surface of attachments attract plaque adhesion. Thus the effect of brushing with different toothbrushes on the surface of attachments is an important factor to study. This would allow clinicians to better advise patients who are undergoing aligner therapy. Four types of brushes are available commercially, namely hard, medium, soft, and ultra-soft. This study analyses the interaction between the kind of toothbrush used and the wear of the surface of the aligner attachment, to understand the impact of a toothbrush on the attachment. Aim To observe the surface wear and change in the shape of the aligner attachment on brushing with four varying hardness of toothbrush bristle (ultra-soft, soft, medium, and hard) over six months to three years. Material and methods One attachment was bonded to the buccal surface of extracted premolars. One tooth with attachment was subjected to SEM analysis and the rest were divided into four groups of five teeth each, based on the type of toothbrush to be used. Brushing with hard, medium, soft, and ultra-soft toothbrushes was carried out in a brushing simulator in two cycles simulating six months, one year, 18 months, and three years of brushing. A contact profilometer was used to evaluate surface roughness before and after brushing and pre- and post-surface roughness values were compared to quantitate changes after which SEM analysis was carried out for qualitative assessment of the surface of the samples. The Shapiro-Wilks test was applied to evaluate the normality of the data, followed by the one-way ANOVA, and statistical significance was applied at p<0.05. Results At six months, the samples brushed with the medium toothbrush showed the least surface roughness (0.2±0.192) and those brushed with the ultra-soft toothbrushes showed the highest surface roughness (1.9±0.159). At one year, the samples brushed with the soft toothbrush showed the least surface roughness (0.46 ±0.31) and those brushed with the ultra-soft toothbrushes showed the highest surface roughness (2.12 ±0.12). At the 1.5-year point, the surface roughness of the samples was lowest in the ultra-soft toothbrush group (0.43±0.39) and the highest in the soft toothbrush group (1.6± 0.41). At the three-year point, the surface roughness of the samples was lowest in the ultra-soft toothbrush group (0.28 ± 0.17) and the highest in the medium toothbrush group (1.6 ± 0.31). Conclusion Ultra-soft toothbrushes have a high abrasive potential, as seen by higher surface roughness values over six months and one year. Morphometric changes were the most noticeable for attachments brushed by hard-bristled toothbrushes and medium-bristled brushes.

Effect of thermomechanical aging on force system of orthodontic aligners made of different thermoformed materials : An in vitro study.

PURPOSE: The aim was to investigate the effect of aging by thermocycling and mechanical loading on forces and moments generated by orthodontic clear aligners made from different thermoplastic materials. METHODS: A total of 25 thermoformed aligners made from 5 different materials, i.e., Essix ACE® and Essix® PLUS™ (Dentsply Sirona, Bensheim, Germany), Invisalign® (Align Technology, San Jose, CA, USA), Duran®+ (Iserlohn, Germany), Zendura™ (Fremont, CA, USA), underwent a 14-day aging protocol involving mechanical loading (a 0.2 mm vestibular malalignment of the upper left second premolar [tooth 25]) and thermocycling in deionized water (temperature range 5-55 °C). The 3D forces/moments exerted on tooth 25 of a resin model were measured at three time points: before aging (day 0), after 2 days and after 14 days of aging. RESULTS: Before aging, extrusion-intrusion forces were 0.6-3.0 N, orovestibular forces were 1.7-2.3 N, and moments as mesiodistal rotation were 0.3-42.1 Nmm. In all directions, multilayer Invisalign® exhibited the lowest force/moment magnitudes. After aging, all materials showed a significant force/moment decay within the first 2 days, except Invisalign® for orovestibular and vertical translation. However, following thermomechanical aging, Duran®+ and Zendura™ aligners had equivalent or even higher vestibular forces (direction of mechanical load). CONCLUSION: Thermomechanical aging significantly reduced forces and moments during the first 48 h. Multilayer aligner materials exhibit lower initial forces and moments than single-layer ones, and were less influenced by aging. Material hardening was observed after subjecting some of the aligner materials to mechanical loading. Thus, orthodontists should be aware of possible deterioration of orthodontic aligners over time. This work also sheds light on how material selection impacts the mechanical behavior of aligners and may provide valuable guidance regarding optimal timing for the aligner changing protocol.

Validation of a double-semicircular notched configuration for mechanical testing of orthodontic thermoplastic aligner materials.

The potential of using specimens with a double-semicircular-notched configuration for performing tensile tests of orthodontic thermoplastic aligner materials was explored. Unnotched and double-semicircular-notched specimens were loaded in tension using a universal testing machine to determine their tensile strength, while finite element analysis (FEA) and digital image correlation (DIC) were used to estimate stress and strain, respectively. The shape did affect the tensile strength, demonstrating the importance of unifying the form of the specimen. During the elastic phase under tension, double-semicircular-notched specimens showed similar behavior to unnotched specimens. However, great variance was observed in the strain patterns of the unnotched specimens, which exhibited greater chance of end-failure, while the strain patterns of the double-semicircular-notched specimens showed uniformity. Considerable agreement between the theoretical (FEA) and practical models (DIC) further confirmed the validity of the double-semicircular-notched models.

Clinical effectiveness of regenerative periodontal surgery and orthodontic tooth movement with clear aligners in stage IV periodontitis: a case series.

OBJECTIVES: To evaluate the clinical effectiveness of regenerative treatment of intra-bony defects in combination with consecutive orthodontic therapy (OT) with clear aligners in stage IV (type 2) periodontitis. METHOD AND MATERIALS: Ten patients with a total of 103 intra-bony defects were analyzed after regenerative surgery using collagen-deproteinized bovine bone mineral with or without collagen membrane or enamel matrix derivative followed by OT with clear aligners. Changes in radiographic bone level (rBL) and probing pocket depths (PPD) were evaluated after 1 year (T1) and at final splinting (T2) after orthodontic tooth movement. RESULTS: Mean rBL gain was significant with 2.13 mm (±1.64 mm) after 1 year (T1) and 3.02 mm (±2.00mm) at final splinting (T2). Mean PPD was significantly reduced from 5.40 mm (±1.80 mm)at baseline to 3.78 mm (±1.73 mm) at T1 and remained stable with 3.73 mm (±1.70 mm)at T2. Pocket closure (PPD< 4mm) was accomplished in 76% of all defects. Tooth loss amounted to 2.9%. CONCLUSION: Within the limitations of the retrospective study design, the findings suggest that the interdisciplinary treatment of periodontitis stage IV by regenerative periodontal surgery and consecutive OT with clear aligners can lead to favorable results.

The Role of Interproximal Reduction (IPR) in Clear Aligner Therapy: A Critical Analysis of Indications, Techniques, and Outcomes.

Interproximal reduction (IPR) has become a standard practice in orthodontic treatment, particularly in the clear aligner therapy. It became an integral part of the digital plan when using clear aligners. Given the irreversible nature of IPR, precise planning and performance is essential. This article aims to analyze and summarize the existing literature on IPR in the context of clear aligners. The goal is to help clinicians to gain essential knowledge for safely and effectively navigating IPR. The review critically examines different perspectives found in the literature, covering indications, methods, and outcomes. Topics exploring the impact of IPR on treatment outcomes include space gaining, addressing tooth size discrepancies, tooth shape adjustments, resolving malocclusion, and enhancing aesthetics. Emphasizing precision of the procedure by the clinician and awareness of contraindications, the article also discusses the impact of IPR on patients. This includes considerations like increased pulp temperature, susceptibility to cavities due to changes in enamel roughness, effects on soft tissues, and post-IPR tooth sensitivity.

Comparison of oral health status, oral hygiene management behaviours and satisfaction of patients with fixed orthodontic appliance and clear aligner: A quasi-experimental design.

OBJECTIVES: This study aimed to determine the overall oral health statuses of patients with fixed orthodontic appliance and clear aligner, as well as their oral hygiene management behaviours and satisfaction. METHODS: We selected 40 participants (20 each with fixed orthodontic devices and clear aligners) who visited a dental clinic. We conducted a survey to determine the oral hygiene management behaviours of the subjects and their satisfaction with their orthodontic treatment. Three measurements were also conducted at 4-week intervals to determine the oral health statuses of the subjects. RESULTS: The Löe and Silness gingival index of patients with fixed orthodontic appliances indicated moderate gingivitis (1.1 ± 0.3), and those with clear aligners had mild gingivitis (0.6 ± 0.4) (p < 0.001). The modified O'Leary index also indicated that the degree of dental plaque deposition in the oral cavity was lower in patients treated with a clear aligner (43.0 ± 18.2 points) than in those treated with a fixed orthodontic (28.1 ± 10.9 points) (p = 0.004). Regarding oral hygiene management, the fixed orthodontic group received scaling more frequently (p = 0.006), received more oral health education (p < 0.001) and had a longer brushing time (p = 0.008) than the clear aligner group. No significant difference was observed in satisfaction between the fixed orthodontic appliance and the clear aligner. CONCLUSIONS: Regarding the oral health status by orthodontic appliance type, the clear aligner group had the advantages of reduction in dental plaque attachment and gingival health. The fixed orthodontic group exhibited better oral hygiene management behaviours. Satisfaction with orthodontic treatment was found to be similar for the two device types.

Biomechanical effects of clear aligner with different shape design at extraction space area during anterior teeth retraction.

OBJECTIVE: This study aimed to investigate the biomechanical effects of clear aligner (CA) with different shape designs at extraction space (CAES) area during space closing. MATERIALS AND METHODS: A finite-element method (FEM) model of mandibular dentition, periodontal ligaments, attachments, and corresponding CA was established. The connecting rod design of CAES was modelled for the control group. Eight test groups with different heights of CAES from -4 mm to +4 mm were designed. Tooth displacement tendencies were calculated. The maximum principal stress in PDLs, teeth, and CAs was analysed. Both global coordinate system and local coordinate system were also used to evaluate individual tooth movements. RESULTS: Across all groups, stresses concentrated on the lingual outer surface of CAESs. For the lowered CAES groups, both the stress value and the stress distribution area at CAESs were increased. The lowered CAES groups showed reduced movement in anterior teeth and less tipping tendency of the canines. CONCLUSION: The shape of CAES has a biomechanical impact on anterior teeth movement and should be considered in aligner design. The results suggest that increasing the height of CAES can enhance anterior teeth retraction, while lowered CAES may facilitate controlled root movement. Changes in the shape of CAES represent a potential direction for biomechanical improvement of clear aligner in extraction cases and are worth exploring.

Lower molar distalization using clear aligners: Is it effective? A systematic review.

Distalization is one of the most useful movements in orthodontic treatments. The aim of this systematic review is to analyze the effectiveness of lower molar distalization using clear aligner therapy (CAT). An electronic search was made from January 2012 to October 2022 using PubMed, Scopus, and LILACS databases without language limitations. This systematic review followed the Preferred Reporting Items for Systematic reviews and Meta-Analyses checklist. The search strategy resulted in 151 studies. A screening was performed to remove duplicates, and all the studies that did not respond to our questions for the title or abstract. Three studies underwent full text analysis. From the evaluation of the studies included in this review, it is possible to state that lower molar distalization is a clinical solution, but it is not a full bodily movement. CAT can provide more specifically a distal tipping movement. This is confirmed analyzing the discrepancy between expected movement and obtained movement. CAT can be considered a valid therapeutic option in patients with dental class III malocclusion, but it is obtained as a tipping movement instead of a body movement. Over-correction should be considered during the planning of the therapy.

Evaluation of maxillary sinus changes following molar distalization using clear aligners: A three-dimensional study.

OBJECTIVE: To evaluate the impact of molar distalization with clear aligners (CAs) on maxillary sinus parameters and its proximity to the root apices of maxillary molars using Cone Beam Computed Tomography (CBCT). METHODS: The study involved pre- and post-treatment CBCT images of 27 adult patients. MIMICS 21.0 software was used to measure maxillary sinus volume and surface area, while Invivo Dental 6.0 program was used to measure the sinus diameters and proximity of the maxillary molar root apices to the sinus floor. RESULTS: Post-treatment, there was a marked increase in the average volume and surface area of the maxillary sinus on both sides; however, changes in dimensions were not statistically significant. Sinus proximity to the root apices of the maxillary molars showed statistically significant differences, particularly on the left side for all roots. Gender and age impacted the outcomes, with males and younger individuals showing more pronounced changes. No significant differences were observed between the left and right sinuses in all parameters. CONCLUSION: Molar distalization with CAs increases maxillary sinus parameters, more notably in younger and male patients. All molar teeth roots moved toward the sinus, particularly the mesiobuccal root of the maxillary second molar protruded to the sinus.

Evaluating anchorage loss in upper incisors during distalization of maxillary posterior teeth using clear aligners in adult patients: A prospective randomized study.

Objective: : To evaluate the effect of clear aligner treatment and differential sequence distalization of maxillary posterior teeth on anchorage loss in the upper incisors (U1s). Methods: : This study used lateral cephalometries and digital models of 12 patients treated with 33% sequential distalization (group 1, mean age: 22.9 ± 0.7 years, five males, seven females) and 12 treated with 50% sequential distalization (group 2, mean age: 25.83 ± 0.5 years, three males, nine females) acquired before and after distalization of upper second premolars (U5) and upper first molars (U6) and upper second molars (U7). The amount of distalization was determined as 2.5 mm in both the groups. Independent Samples t test was used to compare normally distributed parameters. Mann-Whitney U and Wilcoxon tests were used to compare parameters that were not normally distributed. Results: : In both groups, the posterior teeth significantly moved by tipping distally and the U1s were displaced anteriorly. Increase in maxillary posterior transverse width (P < 0.001) and distopalatal rotation were observed in U5, U6, and U7 after distalization. It was also observed that U1 was significantly more proclined (1.82°; P < 0.001) and protruded (0.62 mm; P < 0.001), and the overjet (0.45 mm; P < 0.001) increased more in group 1 than in group 2. Conclusions: : After sequential distalization of maxillary posterior teeth, more anchorage loss was observed in the anterior region in group 1 than in group 2.

Noninvasive conservative management of anterior open bite treated with TADs versus clear aligner therapy.

OBJECTIVES: Anterior open bite can be treated non-surgically via molar intrusion using temporary skeletal devices (TAD). Clear aligner therapy (CAT) is recognized as a viable therapeutic modality for non-extraction treatment of adults with mild open bite. This study aimed to compare the treatment effect and mechanisms of open bite closure between patients treated with braces and TADs double arch intrusion and those treated with CAT. Treatment success at T3 was based on 1- positive overbite on ceph; 2- Change in the vertical dimension 3- post treatment POSI score equal to zero. MATERIAL AND METHODS: The TAD group includes 18 consecutively treated patients from the main author. The CAT group consisted of 16 selected patients from three different orthodontists. The observation time points were as follows: pretreatment (T1), end of molar intrusion and positive overbite achieved (T2), end of treatment (T3), at least 6-month follow-up (T4). Treatment changes were assessed by cephalometric analysis and frontal intraoral photo. RESULTS: At the end of treatment, 100% of the patient of the TAD group and 78,6% of the CAT group had a posi score of 0. The TAD group showed a significant reduction in vertical measurements (SN-MPA: -1,55° ± 0.41, LAFH: -3,05 ± 0.51 mm, U6-PP: -1.48 ± 0.30 mm), but the CAT group did not have significant changes for these variables. Both groups had significant increases in overbite from T1 to T3 (TAD: 4,32 ± 0,5 mm; CAT: 2,33 ± 0.56 mm), and overbite remained stable at T4. The CAT group did not have a significant upper molar intrusion, but a significant extrusion of 1.22 ± 0.42 mm of the lower incisor occurred. CONCLUSION: The TAD group achieved bite closure by upper molar intrusion, lower molar and incisors vertical control, and mandibular plane counterclockwise rotation, resulting in an improved AP and vertical relationship. The CAT group achieved bite closure through the lower incisor extrusion without significant change in the vertical dimension. CLINICAL RELEVANCE: This study provides relevant information about the skeletal and dental changes of open bite treatment with TADs double arch intrusion. The comparison with a control group treated with CAT confirms known information.

Comparison of Mechanical Behavior of Clear Aligner and Rapid Palatal Expander on Transverse Plane: An In Vitro Study.

(1) Background: This study aims to investigate, within a controlled laboratory environment, the magnitude of the transversal load and the force decay over time produced by clear aligners in comparison to a Rapid Palatal Expander (RPE). (2) Methods: Resin models of a dental maxillary arch, additively manufactured from an intraoral scan, were inserted in a testing machine with uniaxial load cells to measure the force trend over time expressed by RPE and clear aligners. The mechanical load was recorded during a certain timeframe for both appliances. (3) Results: The force expressed by the RPE ranged from 30 to 50 N for each activation, decreasing with a nonlinear pattern over time. The force expressed by the clear aligner ranged from 3 to 5 N, decreasing with a linear pattern over time. In contrast, the force generated by the clear aligner fell within the range of 3 to 5 N, showing a linear reduction in force magnitude over the observed period of time. (4) Conclusions: The RPE exerted a force magnitude approximately ten times greater than that generated by clear aligners. Nevertheless, it is essential to acknowledge that the oral environment can significantly influence these results. These limitations underscore the need for caution when applying these findings to clinical settings.

Stability and Success of Clear Aligners in Orthodontics: A Narrative Review.

The implementation of Clear Aligner Therapy (CAT) in adult orthodontics exemplifies the integration of advanced technology in the dental healthcare sector. Representing a significant shift in modern orthodontics, CAT offers a convenient and aesthetic alternative to traditional fixed appliance treatments for mal-aligned dentition. This narrative review aims to explore the applicability of CAT, delineating its biomechanics, indications, contraindications, scope, limitations, and factors influencing long-term stability and successful outcomes. A comprehensive literature search was conducted using databases like Google Scholar, PubMed, Cereus, and the Cochrane Library. Articles were selected based on their relevance to clear aligners, without brand specificity, and covered a wide range of cases to establish CAT's scope and limitations. This review includes individual case studies, systemic reviews, comparative analyses, case reports, finite element analyses, and prospective and retrospective analyses, all contributing to a nuanced understanding of CAT's applicability and long-term treatment stability. The conclusion underscores CAT's growing acceptance in orthodontics, including its application in challenging cases, and highlights key determinants that bolster its long-term efficacy.

Three-dimensional measurement and analysis of Mandibular Molar Distalization assisted by micro-implant anchorage combined with clear aligner.

Objective: To investigate the effect of micro-implant anchorage combined with a clear aligner on the efficiency of mandibular molar distalization and the protection of anterior teeth anchorage, provide reference for clinical scheme design. Methods: This is a prospective study. Seventeen patients who were treated in the Orthodontics Department of the Hospital of Stomatology affiliated to Fujian Medical University from 2019 to 2021 and used Invisalign clear aligners to move mandibular molars distally were included and divided into two groups according to anchorage types: Group-A and Group-B. Group-A (ten cases) were treated without micro-implant anchorage, while Group-B (seven cases) were treated with micro-implant anchorage nails for enhanced anchorage. The effect of micro-implant anchorage on crown and root distal movement of mandibular molars and the difference in three-dimensional movement between mandibular molars and mandibular central incisors were analyzed. Results: The crown distalization efficiency of mandibular first and second molars in Group-B was 68.66% and 71.02%, respectively, which were higher than those in Group-A(p<0.05). The mandibular central incisors in Group-A showed labial displacement and a small amount of elongation, while those in Group-B showed less anchorage loss(p<0.05). In Group-A, the crown was tilted in the distal direction and moved in the buccal direction during mandibular molar distalization(p<0.05). While in Group-B, the crown was tilted in the distal directio (p<0.05) and the mandibular second molar was depressed(p<0.05). Conclusion: In the process of mandibular molar distalization assisted by micro-implant anchorage combined with a clear aligner, better protects the anchorage of the mandibular central incisor and improves the efficiency of the molar crown distalization.

Surface wear of attachments in patients during clear aligner therapy: a prospective clinical study.

BACKGROUND: This prospective clinical study aimed to quantitatively evaluate the surface wear of attachments and investigate the associated risk factors. Additionally, the wear values and regions of three types of commonly used attachments were explored. METHODS: Participants were recruited from the population of patients who received clear aligner therapy from October to December 2022. Intraoral scanning was performed on eligible participants before treatment (T0), immediately after initial bonding of attachments (T1), and at 2 months (T2), 4 months (T3), 6 months (T4), and 8 months (T5) after starting treatment. The attachment volume, average depth and regions of attachment wear were measured using superimposed digitized models. The Kruskal-Wallis test was performed to compare data between multiple groups. Multiple linear regression analyses were performed to evaluate risk factors for the volume of attachment wear. RESULTS: A total of 47 patients with 617 attachments were included. As treatment time increased, the attachment volume decreased significantly (P = 0.003). The initial attachment volume was positively related to the volume of attachment wear (ß = 0.527, P < 0.001). The volume of attachment wear was significantly greater in females than in males (ß = 0.147, P = 0.020) and in optimized attachments than in conventional attachments (ß = 0.308, P < 0.001). The wear of 3-mm rectangular attachments progressed from edges to buccal surfaces, with the deepest wear at corners of gingival edges; the wear of the optimized attachments was primarily located on surface ridges. The wear volume ratio of the optimized root control attachments was significantly greater than that of the 3-mm rectangular attachments at T3 (P = 0.011), T4 (P < 0.001), and T5 (P < 0.001). CONCLUSIONS: The volume of attachment wear increased gradually with treatment time. Sex, attachment type, and initial attachment volume were risk factors for the volume of attachment wear. The deepest wear regions of 3-mm rectangular attachments were at the corners of gingival edges, while the deepest wear regions of optimized attachments were at surface ridges. Four months after treatment, optimized root control attachments showed more relative wear than 3-mm rectangular attachments.

Assessment of dental, skeletal, and soft tissue changes following mandibular advancement with Invisalign in skeletal Class II.

Objective: This study evaluated the dentoskeletal and soft tissue changes for Class II malocclusion patients treated with Invisalign clear aligners with mandibular wings (IAMW). Methods: This retrospective study included 50 skeletal Class II patients treated with Invisalign clear aligner with mandibular wings. Records of 20 subjects were collected from the AAOF Legacy Collection (The Case Western Bolton Brush Growth Study) and were used as a control. The dental, skeletal, and facial soft tissue changes were assessed by digitizing and analyzing lateral cephalograms using Dolphin Imaging software (version 11.95 Premium; Dolphin Imaging & Management Solutions, Chatsworth, Calif). Paired t-tests and independent t-tests were used to assess the changes before and after and to compare between the IAMW and control groups. Results: The different measurements of the maxilla have shown that IAMW effect on the maxilla included minimal, non-significant retraction compared to the control group. The SNB and mandibular base position increased by 1.17° (±2.63) and 3.79 (±8.13), respectively. The mandible advanced significantly in the treatment group compared to the control group. Dentally, the lower incisors tipped slightly buccally, but the change was not significant (p > 0.05). The facial convexity angle decreased by 1.16° (±4.36). Conclusion: Invisalign clear aligner with mandibular advancer wings was able to correct the Class II malocclusion. This correction was mainly skeletal with some dental changes. This device can be used to address the growth modification problem in Class II malocclusion at the same time as addressing the other occlusal problems.

In vitro assessment of dental erosion caused by clear aligners.

The primary objective of this in vitro study was to investigate the erosive potential of enamel under the use of clear aligners (CA), by simulating in vivo conditions experienced by patients who do not remove their CA during the consumption of acidic beverages. In addition, the difference in erosion protection conferred by artificial and human saliva was also evaluated. Sound-extracted human premolars (n = 20) had half of their surfaces protected with acid-resistant nail polish and were randomly distributed into two experimental groups (n = 10): teeth immersed in human saliva or artificial saliva. All teeth had half of their lingual surfaces enclosed by a CA device. The erosive challenges consisted of individual immersion of each sample in citrus acid three times a day, intermediated by immersion in human saliva or artificial saliva for 2 h, during ten days of the erosive protocol. The enamel mineral content was analyzed by high-resolution microtomography. The differential mineral concentration profiles were obtained by subtracting the profile of the mineral concentration of the exposed area and enamel under the CA area from the respective sound area (control). In addition, enamel wear and enamel volume loss were measured. Scanning electron microscopy (SEM) was also performed to analyze the enamel surface. Data were analyzed by two-way ANOVA, followed by the Student-Newman-Keuls test. The enamel wear was higher in teeth immersed in artificial saliva, when compared to human saliva (p < 0.001). The volume loss of the exposed enamel area was lower for tooth immersed in human saliva than in artificial saliva (p < 0.001), during the acid challenge protocol. The use of CA during acid challenges promoted wear and mineral loss of dental enamel, being these changes more pronounced on the enamel surface under the CA. These results open a new path for the development of further studies adopting clinical protocols that promote more accurate responses in the clinical practice during orthodontic treatment.